|
Author Topic:   tank modding info
Rex R
Member
posted May 18, 2002 02:12 AM            
while testing the plasma beam I found that the placement of the tankgun (in relation to the zero point) makes a difference in the apperence of the tankgun projectile. as in if the muzzle is set at .5 meters above the zero plane the projectile and smoke will appear .5 meters below the muzzle end.

IP:

BamZipPow
Member
posted May 18, 2002 05:19 PM            
So does the tank gun need to be at 0 then?

IP:

KiLlEr
Member
posted May 18, 2002 05:33 PM            
The turret must be centered in the X and Z axies and the barrel is centered on the Y-axis. Everything (barrel, turret, and body) should line up with each other.

[This message has been edited by KiLlEr (edited May 18, 2002).]

IP: