|
Author Topic:   Mesh problems
Sage
Member
posted May 25, 2003 04:48 PM            
Ok, for some strange reason, all the meshes in the game are either transparernt or invisable. But many of them look like normal when I get close to them. Like on dark maps, meshes like the drill are hard to see, basicly shiny meshes. Also, at the tank screen, the tanks are all transparent.

So what should I do?

IP:

=DNX= Matrix
Member
posted May 25, 2003 10:07 PM            
goto minimum settings, see if that changes anything, if it does, keep increasing the settings till u get it where it doesnt error at a setting u like !

My bet is its in 32 bit.

If that fails, reinstall the sukka.

IP: